Overview

The X-3 Series THREAD has a multicolor LED below the power button that provides a diagnostic indication of its current state. The reference guide below will assist the user in determining the current state of the Thread.

Color Diagnostic References

Color Spectrum LED: Boot up

Indicates boot process from cold start or sleep mode. This process lasts approximately 120 seconds.

CROSS-COLOR SPECTRUM MODULATION

Green LED: Connected

THREAD is active and operating in high-power mode and IS connected to the cloud.

GREEN FLASH, 3 SECOND FREQUENCY

Red LED: Disconnected

THREAD is active and operating in high-power mode and IS NOT connected to the cloud.

RED FLASH, 3 SECOND FREQUENCY

Blue LED: Low power mode

THREAD is in low-power mode to conserve battery and will wake at the next scheduled time.

BLUE FLASH, 10 SECOND FREQUENCY

Yellow LED: Battery below lower limit

Thread is in low-power mode to conserve battery and will wake once input power is restored and the battery exceeds the low voltage cutoff threshold.

YELLOW FLASH, 10 SECOND FREQUENCY

Note: Any other LED colors being observed from the THREAD should be noted and contact support by creating a ticket at support.infrastructureiot.com as this is unusual and unwanted behavior.