This article will provide instructions and links to enable the user to set up the Ackcio Analog Logger node and configure it to the proper settings to connect to the Sensemetric mesh network. Be sure to add the (Add link for Gateway Setup) prior to setting up the analog logger.
Assembly and Setup of the Logger
Refer to the support article, Analog Logger Setup, on the Ackcio support website of assembly of the node and initial setup steps. This guide can be followed through Step 6 of "Configuring via the ACKCIO Beam App".
Select Gateway in Step 6 of the configuration. Continue with Step 6 ii of resetting the node, and then select "Wireless Mesh" in Step 6 iii. Continue through the "Setup Logger" steps to continue configuring the logger.
The analog logger and connected sensors should now be reporting data to the Ackcio gateway Thread and into the Sensemetrics app via the API set up during the Ackcio Beam Gateway installation.