The X Series THREAD has a multicolor LED that will indicate the current state that it is in. You can reference below to determine what state your THREAD is in.
Color Spectrum LED: Boot up
Indicates boot-up process after being turned on or from being in low power mode.
MULTI-COLOR PULSING, 60 SECOND FREQUENCY
Green LED: Connected
THREAD is active and operating in high-power mode, and connected to the cloud.
GREEN PULSE, 3 SECOND FREQUENCY
Pink LED: Reading/Observation being recorded
THREAD is on and is taking a reading.
PINK PULSE, ONCE, AT TIME OF READING.
Blue LED: Low-power mode
THREAD is in low-power mode to conserve battery power
BLUE PULSE, 10 SECOND FREQUENCY
Red LED: Disconnected
THREAD is active and operating in high-power mode but NOT connected to sensemetrics app
RED PULSE, 3 SECOND FREQUENCY
Yellow LED: Low Battery Cut-off Engaged
THREAD battery percentage dropped below 10%, and an automatic power schedule override is in place until the Thread is sufficiently recharged.
YELLOW PULSE, 10 SECOND FREQUENCY
Note: Any other LED colors being observed from the THREAD should be noted and contact support at email@example.com as this is unusual and unwanted behavior.
For older version THREADS, use the reference chart below for LED status indication.
|THREAD Version||Booting||Always On||Low-Power||Reading|